EnergyFlip All-in-1 Analog gas solar – Read digital or analog gas meter and smart electricity meter – Read solar panels – 1-phase

direct inzicht in opwek en teruglevering zonnepanelen
uitlezen analoge of digitale meter


Not in stock Currently not instock in our warehouse(s) please come back later.

E-mail wanneer weer op voorraad

  • Energy consumption manager with a sensor and an Eastron kWh meter SDM230 Modbus MID
  • Read your electricity via the P1 meter
  • Read your digital or analog gas meter
  • Read your solar panels generation and feed-in
  • Read your gross consumption

Product description

With the EnergyFlip All-in-1 analog gas solar 1-phase, you can read your energy consumption and solar panels out optimally. In addition to feed-in, you can also see what you consume, your gross consumption.


This EnergyFlip All-in-1 Solar 1-phase pack is intended for a smart meter (so it is incompatible with a measuring plug or analog meter) with a 1-phase connection for your solar panels. Are you not sure which connection you have? Please contact your solar panel supplier or electrician.


Please note

The pack consists of an EnergyFlip, a gross production meter and a cable and can esily be installed by a certified installer (electrician). Please note that only your solar panels are on the group and that no consuming devices are connected to it. Otherwise, no proper measurement can be made. Additional installation instructions can be found here.



1 2 3 4 5

Clear insight into your consumption and feed-in. Great help with the installation.


Works all super! Easy-to-connect put the app on your mobile phone, Plug and Play. It’s nice to see what the solar panels deliver real-time. With this dark weather of the last few days practically nothing!!!! So I’m very curious what they will be doing on a summer day. I didn’t have time yet to reduce my stealth consumption, at least a shorter shower….


We have chosen EnergyFlip, because it can display our energy consumption and feed-in of the solar panels in real time (with the solar expansion pack). And that independently of the energy supplier.

The app also looks nice and clear for iOS.

Hans & Karin

How it works

With solar panels you generate sustainable electricity yourself. Initially, you use that electricity directly at home. If you produce more than you consume, you supply power back to the electricity grid. With EnergyFlip and a smart meter, you measure how much power you take from the grid, but also what your feed-in is.


Are you going to install? Then start the installation process in the app. Installation of the sensors is explained in an FAQ article; Installation aid analogue/Digital Meter (with sensors) – EnergyFlip (for now only in Dutch available)

This is how you use the energy from your solar panels even smarter

Excess electricity produced can still be fed back to the grid. This is called netting. However, this netting arrangement will be phased out from 2025. It is therefore smart to adjust your power consumption to your power production.

Is your power production from your solar panels high? Then turn on energy guzzlers such as the washing machine, dryer or dishwasher. In this way you use the sustainable electricity generated by your solar panels and not the electricity from your energy supplier.